Eureka Opal Insert

The Eureka Opal Insert wood heater designed with its four sided surround will heat 160m2.

Installed off the floor in a Zero Clearance application or into a fireplace its a robust wood heater for the average Australian home.

Capacity: 160m2
Log Length: 490mm
Flue Size: 150mm
Efficiency: 72%*
Emissions: 0.9 g/kg
Output: 14kW

(Eureka Heater Range)


  • A large door, a powerful three speed fan and a firebrick lined firebox are main unique features.
  • Maximum heat output and long burn periods per fuel load.
  • Quality three-speed fan, designed for easy access and removal.
  • Clean glass door during normal burning (self-cleaning). Heavy duty removeable 8mm thick steel sacrificial baffle plate.
  • Deep ash bed for convenient ash retention.
  • Mimimum hearth requirements.
  • Strong welded seam and folded 6mm firebox.
  • Superior baked high temperture paint finish.
  • 5mm heat and shock resistant clear vision door glass.
  • Firebrick lining on the sides and back of the firebox which enchances the combustion efficiency whilst protecting the most vulnerable part of the firebox.
  • Complies to A.S. 4013.

Fascia Dimensions

Capacity: Up to 160m2
Facia Height: 750mm
Facia Width: 882mm
Facia Depth: 42mm
Rear Casing Height: 595mm
Rear Casing Width: 570mm
Rear Casing Depth: 365mm
Flue Size: 150mm
Weight: 120kg
Back of woodheater to centre of flue: 134mm
Back of fascia to centre of flue: 231mm

Clearances and Hearth Dimensions

Minimum Hearth Size: Width: 890mm – Depth: 570mm – Thickness: 12mm
(530mm in front of woodheater base)**
To Side Member: 50mm
From top of appliance to underside of mantle: 352mm
Top of appliance to timber mantle breast plate: 292mm
From back of fascia to front of flue spigot: 148mm

*Peak efficiency % quoted

**To achieve a minimum hearth depth of 400mm, unit must be raised by minimum 103mm